Installing Reports and Domain Definitions on ITPA. ( install.sh procedures )

These snapshots are from installing the 623 FP1 - Reports and Domain Definitions -

These were taken after the ITM and the OS Agent were installed.








Select '1'
























Now, I installed ITPA - but did not configure it.

cinfo -t  
will list the domains installed.

[root@nc184132 ~]# diff before after ( After lists the domains installed )
2c2
< *********** Mon Aug 12 08:10:12 CDT 2013 ******************
---
> *********** Mon Aug 12 08:57:57 CDT 2013 ******************
53a54,61
> p0   Performance Analyzer Domain for DB2                       tpa     06.23.01.00   20552           20130812 0831
> p3   Performance Analyzer Domain for OS agent                  tms     06.23.01.00   20552           20130812 0832
> p3   Performance Analyzer Domain for OS agent                  tpa     06.23.01.00   20552           20130812 0831
> p3   Performance Analyzer Domain for OS agent                  tpd     06.23.01.00   20552           20130812 0829
> p3   Performance Analyzer Domain for OS agent                  tps     06.23.01.00   20552           20130812 0830
> p3   Performance Analyzer Domain for OS agent                  tpw     06.23.01.00   20552           20130812 0828
> p4   Performance Analyzer Domain for Oracle                    tpa     06.23.01.00   20552           20130812 0831
> p6   Performance Analyzer Domain for System p                  tpa     06.23.01.00   20552           20130812 0831
57a66,67
> pi   Performance Analyzer Domain for ITCAM RT                  tpa     06.23.01.00   20552           20130812 0831
> pu   Performance Analyzer Domain for VMware                    tpa     06.23.01.00   20552           20130812 0831




The PA button is on the TEP GUI.

and the  codes for the Agent are still showingup - this is not readable.
in order to make it readable one has to configure the TEPS.
( which will be covered in the next blog )