PA configuration button is missing on TEP GUI Client

This may mean the Base PA component is installed - but the KPA tables got missed ! out during installation ( due to some other issues during installation that may have been missed ! )

To resolve it:

login to the TDW and issue the DB2 command.

list tables for all , you will notice that the KPATASKS and other tables did not get installed.

Reinstall Base ITM PA component  all over again, this should install these tables in the Database.

KPAATTR                         ITMUSER         T     2013-11-12-15.32.03.183984
KPACONF                         ITMUSER         T     2013-11-12-15.32.03.587728
KPACONSTRAINTS                  ITMUSER         T     2013-11-12-15.32.03.261101
KPADOMAINS                      ITMUSER         T     2013-11-12-15.32.03.456838
KPAEXCCONSTR                    ITMUSER         T     2013-11-12-15.32.03.433998
KPAEXCEPTIONS                   ITMUSER         T     2013-11-12-15.32.03.421418
KPAFOLDERS                      ITMUSER         T     2013-11-12-15.32.03.409192
KPAIDENTDESTS                   ITMUSER         T     2013-11-12-15.32.03.280190
KPAIDENTSRCS                    ITMUSER         T     2013-11-12-15.32.03.293082
KPAJOINS                        ITMUSER         T     2013-11-12-15.32.03.317892
KPALOCK                         ITMUSER         T     2013-11-12-15.32.03.348430
KPANODES                        ITMUSER         T     2013-11-12-15.32.03.221328
KPAOUTPUTS                      ITMUSER         T     2013-11-12-15.32.03.235559
KPAOUTPUTSETS                   ITMUSER         T     2013-11-12-15.32.03.333083
KPAPROPS                        ITMUSER         T     2013-11-12-15.32.03.165697
KPASPSSTASKS                    ITMUSER         T     2013-11-12-15.32.03.387054
KPATASKS                        ITMUSER         T     2013-11-12-15.32.03.091619
KPATFRAMES    



( at this time - the Report and Domain Component need not be installed to see this symptom )

After reinstallation of the Base ITM PA component - the button is visible.



At this point - the various support for the agents are not seen ( since the Report and Domains support is not installed )



On a different note ...to reinit the tables if they were existing and somehow deleted accidentally !

 MTEMS and reconfig the PA - and Init the Data base tables.
This also recreates the 18 KPAxxx tables.